Облачная платформа для Power Iot
Применение

Substation, building, telecommunication base station, industrial energy consumption, intelligent lighthouse, operation and maintenance of power.

Структура

Основные функции

Alarm Analysis

Energy situation

Details of electrical parameters

Equipment status

Выбор продукта

AF-GSM500-4G Gateway

● 1. Meter reading by LoRa or RS485

● 2. Uplink Communication:4G or Ethernet

● 3. Protocol: Modbus-TCP,MQTT,etc,protocol can be customized

● 4. Support breakpoint transmission,local data storage,local display and button setting.

Anet-1E2S-4G Gateway

 

 

● 1. Downlink:2* RS485

● 2. Uplink:4G

AF-GSM300-HW868 Smart Gateway

● Support data acquisition of the serial port MODBUS RTU protocol.
● Support for data acquisition of up to 30 MODBUS RTU devices.
● Support the acquisition of 5 register address fields for each MODBUS device.
● Support triggering alarms by presetting alarm addresses and alarm values for each MODBUS address range.
● Support server MODBUS or LORA unvarnished transmission communication.
● Support to connect the data center by fixed IP and dynamic domain name resolution.

AWT100-4GHW Gateway

 

● 1. Downlink: RS485

● 2. Uplink:4G, WiFi or Ethernet

Подробнее

AEW100 Wireless Energy Meter

AEW 100 is a multifunction power meter. There are functions like RS485 communication and Lora communication on 470MHz. With build-in MODBUS-RTU protocol, AEW100 can match most of the system integrate requirement. AEW100 has the advantage of higher accuracy, more compact and easy installing.

ADW210 IOT meter

 

● Measurement: 4 circuits 3 phase voltage,current,power,power factor ,etc.

● Max demand

● Communication:RS485 or LoRa

Подробнее

ADW300 wireless meter

ADW300 wireless meter is mainly used to measure three-phase active power in low-voltage network. It has the functions of RS485 communication and 470MHZ wireless communication. It is convenient for users to monitor, collect and manage electricity. It can be flexibly installed in the distribution box to realize the measurement, statistics and analysis of individual electric energy in different regions and loads.
Подробнее

APM830 Multifunction Meter

 

● 1. Measurement:current,voltage,energy,SOE,etc.

● 2. DI/DO,AI/AO,TF card,etc.

● 3. Communication:2*RS485,Ethernet and Profibus-DP

Подробнее

AMC96L-E4/KC Multifunction Meter

● True RMS Measurements

● THD with 2-31st Harmonics

● Max/Min Log with Timestamp

● Internal Optional 4DI&2DO or 2DI&2DO&2AO

● Standard one Energy Pulse Output

Подробнее

ADL100-ET Single Phase Multi-function Energy Meter

● AC220V

● 10(60)A, 20(100)A

● RS485(MODBUS-RTU)

● Set parameters

● LCD display

● kWh Class 1

● DIN 35 mm

Подробнее

AKH-0.66/K series current transformer

General

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

Standards
IEC/EN61869-1, IEC/EN61869-2
Подробнее

AKH-0.66/I series current transformer

General

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

Standards
IEC/EN61869-1, IEC/EN61869-2
Подробнее